Professional Security Camera is compact, rugged, and
features a 1/3-inch image format digital monochrome CCD
sensor. Superior sensitivity and high resolution provide
optimal performance in virtually all environments. Easy
installation, digital signal processing, on screen displays,
superior picture quality and reliability bring video
performance of this high resolution monochrome
camera to a superior level.
Camera comes with a lens wizard that automatically detects
the type of lens installed and provides an OSD guide that
allows easy adjustment of the lens level and focus without
special tools or filters. On screen displays (OSD) and
5 Menu Keys provide quick and easy access to all
camera features.
Camera uses any C or CS mount type Lenses including
compatible 4-pin Varifocal Lenses (Video-iris and DC-iris).
Camera case includes both Top and bottom threaded
1/4"/20 UNC mounts.
Video Output is via a standard BNC female connector.
Camera Video Output is compatible with any standard
video monitor, television with video-input jack,
video recorder, video multiplexer, and computer
video capture card or device.
These cameras are extremely sensitive to very low light
levels and to Infrared Light (IR). The light of a single
match produces a very bright scene illumination.
"Click" on the 2-frame animation below for an example.
Specifications:
Active pixels (H x V): 582 H x 494.
Resolution: 570 TVL.
Minimum illumination: <0.09 lux.
Signal-to-noise ratio: > 50 dB.
Video output: 1 Vpp, 75Ω.
Shutter: Auto/Flickerless/Off - 1/60 - 1/600000 Sec.
Operating temperature: -4ºF to +122ºF.
Camera operates on and requires either:
11-36 VDC at 4 Watts (350 Ma. at 12VDC), or
12-28 VAC/60Hz. at 4 Watts (170 Ma. at 24VAC).
Size: 4 3/4" x 2 7/16" x 2 1/8". Weight: 1 LB.
UL listed.
Bosch/Philips model: LTC0355/20.
With Owner's Manual. (No Lens is included, Uses any common C/CS mount Lens).
See below for available lenses.
This unit is in Excellent physical and electrical condition.
Original cost $150.
Price: $20.00
Security Camera Lenses.
We have a very limited number of Security Camera Lenses
suitable for use with the camera listed above.
All Lenses are in very good physical/electrical condition.
Most Lenses only have an available quantity of 1 piece.
6mm Security Camera Auto Iris Lense.
6mm Fixed Focal Length, F/1.4 Aperture, DC Auto Iris
with standard 4-pin DC Iris cable and connector.
Features Color Corrected Optics, Neutral Density (ND)
Filter,
Adjustable Focus, and Slip clutch on lens mount for easy positioning.
3.5-8mm Adjustable Focal Length, F/1.4-F/90 Aperture,
DC Auto Iris with standard 4-pin DC Iris cable and connector.
Features Color Corrected Optics, Neutral Density (ND)
Filter,
Adjustable Focus, and Slip clutch on lens mount for easy positioning.
For use with 1/3" image sensor. CS Mount.
Suitable for use with the above Camera.
Original cost $80.
Price: $25.00
Data Sheet - PDF File size: 201K
2.8-12mm Security Camera Auto Iris Zoom Lense.
American Dynamics Model ADCLVF3212DC / LD281213CS.
2.8-12mm Adjustable Focal Length, F/1.3-F/360 Aperture,
DC Auto Iris with standard 4-pin DC Iris cable and connector.
Features Color Corrected Optics, Neutral Density (ND)
Filter,
Adjustable Focus, and Slip clutch on lens mount for easy positioning.
For use with 1/3" image sensor. CS Mount.
Suitable for use with the above Camera.
Original cost $100.
Price: $30.00
Security Camera AC Adapter.
12 VDC output supplies power to above LTC0355/20 Camera.
Plugs into a standard 115 VAC AC socket.
This item is New.
Price: $6.50
Security Camera AC Adapter.
AC Adapter is rated at 13.5 VDC/1000 Ma.
For use with any Camera that requires 12 VDC power.
Will supply power to up to 3 LTC0355/20 Cameras.
Plugs into a standard 115 VAC AC socket.
This item is New.
Price: $8.50
Security Camera AC Adapter.
Heavy-duty Class 2 power transformer.
AC Adapter is rated at 24 VAC/1.6 Amperes.
Plugs into a standard 115 VAC AC socket.
Screw terminal output.
For use with any Camera that requires 24 VAC power.
Also can be used with any piece of equipment requiring
24 VAC and up to 40VA (about 1.6 Amperes).
UL Listed.
This item is New.
Note: This Item is heavy. If shipped outside the United States
we must charge the Actual Shipping Cost.
Please Email us before ordering.
Price: $15.00
IR Illuminator.
IR Illuminator features 21 high power 5mm Infrared LEDs.
IR beam outputs at 940 nm, and produces 300 Mw total
output power. 40 degree beam angle. Current consumption
when operating on 12VDC power is 300 Ma.
IR Illumination is totally invisibe to the naked eye.
Also features high-impact polystyrene construction,
internal reflector, a hang-up hook, magnetic base,
and an external DC Power Jack.
IR Illuminator operates on included AC Adapter. Can also be operated
from any other 12 VDC / 300 Ma. power source.
Overall size (less hook): 12" x 3 1/4" x 3".
Perfect with use with B/W CCD cameras and IR nightscopes.
Most B/W CCD cameras are extremely sensitive to Infrared Light (IR).
"Click" on the 3-frame animation below for an example.
With Instructions and AC Adapter.
(Stock #: IRILLUM)
Price: $20.00
IR Illuminator Module.
Fully-constructed, self-contained module features 32 high power
5mm infrared LEDs. IR beam outputs at 870-950 nm, and
produces 500 mW. total output power. 40 degree beam angle.
IR Illuminator Module operates on included detachable
12 VDC / 300 Ma. AC adapter or can be operated from
any 12 VDC / 300 Ma. power source such as a car battery.
Module size: 3" x 2 1/4" x 1 1/4".
With removable 3/4" threaded mounting standoffs.
Perfect with use with B/W CCD cameras and IR nightscopes.
With Instructions and AC Adapter.
(Stock #: EMODIR)
Price: $12.50
Indoor Dual-Sound Alarm Siren.
Dual-sound alarm siren operates with most alarm systems.
Siren produces a 106 dB "warble" or a steady-pulse sound.
Can be mounted with or without a standard single-gang
electrical box. Mounts Horizontally or vertically.
Terminal strip with screws for easy wiring.
Operates on 12 VDC at 500 Ma.
Size: 4 3/8" x 3 1/4" x 2". UL listed.
Ademco/Honeywell model: Wave 2.
With instructions and mounting hardware.
This unit is NEW in factory box.
Price: $10.00
Passive Infrared Detector.
Passive Infrared Detector for use with most alarm system panels.
Unit features 40 foot x 40 foot 85°-wide detection coverage
with 72 zones and selectable Pulse Count.
Other features include Sealed Optics, Multi-Focus Lens,
Temperature Compensation circuitry, LED Motion Indicator, and Tamper Switch.
Mounts into a standard single-gang electrical box.
Terminal strip with screws for easy wiring.
Operates on 9.5-16 VDC (11 mA. max).
Overall size: 4 1/4" x 2 1/2" x 1 3/4". UL listed.
Optex model: FX-40.
With instructions and mounting hardware.
This unit is in Excellent physical and electrical condition..
Price: $10.00
Passive Infrared Detector.
Passive Infrared Detector for use with most alarm system panels.
Unit features 40 foot x 40 foot 85°-wide detection coverage
with 78 zones and selectable Pulse Count.
Other features include Sealed Optics, Multi-Focus Lens,
Temperature Compensation circuitry, and LED Motion Indicator.
Mounts into a standard single-gang electrical box.
Terminal strip with screws for easy wiring.
Operates on 9.5-16 VDC (11 mA. max).
Overall size: 3 3/4" x 2 1/4" x 1 5/8". UL listed.
Optex model: RX-40PI.
With instructions and mounting hardware.
This unit is in Excellent physical and electrical condition..
Price: $10.00
Photoelectric Smoke Detector.
Professional 2-Wire Photoelectric Smoke Detector for use
with compatible alarm system panels.
Detector features Microprocessor control, LED Status indicators,
and an internal thermal detector for high/low temperature conditions.
Mounts with included Screw-Terminal Mounting Base.
Operates on 12 or 24 VDC at 130 Ma. (Max.)
Overall Size: 5 1/4" diameter x 2". UL listed.
i3 System Sensor model 2WTR-B.
With Screw-Terminal Mounting Base and Instructions.
Note: This item is meant for use by professional
alarm installers for use in commercial alarm systems.
This unit is NEW.
Price: $20.00
Photoelectric Smoke Detector.
Professional 4-Wire Photoelectric Smoke Detector for use
with compatible alarm system panels.
Detector features Microprocessor control, LED Status indicators,
and an internal thermal detector for high/low temperature conditions.
Mounts with included Screw-Terminal Mounting Base.
Operates on 12 or 24 VDC at 130 Ma. (Max.)
Overall Size: 5 1/4" diameter x 2". UL listed.
i3 System Sensor model 4WTR-B.
With Screw-Terminal Mounting Base and Instructions.
Note: This item is meant for use by professional
alarm installers for use in commercial alarm systems.
This unit is NEW.
This unit is NEW.
Price: $25.00
Heat Detector.
Professional Heat Detector for use with
compatible alarm system panels.
Heat Detector features a fixed UL/ULC rating of 194° F.
N. O. contacts rated 1A at 6-24VDC.
Terminal strip with screws for easy wiring.
Mounts with included Mounting Base.
Overall Size: 5" diameter x 2". UL listed.
Edwards Systems Technology model 284B-PL.
With Mounting Base and Instructions.
Note: This item is compatible with any
alarm panel with N.O. contacts.
This unit is NEW.
Price: $10.00
Standard Detector Base.
Screw-Terminal Detector Mounting Base for use with
EC/MC/SC/ZC Series Detectors.
Size: 4 1/2" diameter x 5/8".
Edwards model CSBU-1.
With Instructions.
This item is NEW.
This unit is NEW.
Price: $5.00
Detector Base.
Screw-Terminal Detector Mounting Base for use with
Signature Series Detectors.
Size: 4 1/4" diameter x 3/4".
EST model SIGA-SB.
With Instructions.
This item is NEW.
Price: $6.50
Replacement Alarm System Power Transformer.
Heavy-duty Class 2 replacement power transformer.
Screw terminal output. Rated at 12 VAC 40VA.
For use with Radio Shack / Safehouse Alarm System models:
49-450, 49-451, 49-454, 49-470, 49-475.
Also can be used with any piece of equipment requiring
12 VAC and up to 40VA (about 3.3 Amperes).
UL Listed.
This item is NEW.
Note: This Item is heavy. If shipped outside the United States
we must charge the Actual Shipping Cost.
Please Email us before ordering.
Price: $27.50
Replacement Alarm System Power Transformer.
Heavy-duty Class 2 replacement power transformer.
Screw terminal output. Rated at 16.5 VAC 40VA.
For use with Ademco/Honeywell Alarm System models:
VIA-16, VIA-30PSE, VISTA-10, VISTA-10SE, VISTA-15P,
VISTA-20, VISTA-20HW, VISTA-20HWSE, VISTA-20P,
VISTA-20PSIA, VISTA-20SE, VISTA-40, VISTA-50P,
VISTA-50PUL, VISTA-128, VISTA-4120EC,
VISTA-4120XM, VISTA-4140XMP, VISTA-4140XMPT,
VISTA-4140XMPT2, 4110DL, 4110XM.
For use with ADT Alarm System models:
Safewatch Pro 2000, Safewatch Pro 3000.
For use with DMP Alarm System models:
1512, 1812, 1912XR, XR5FC, XR5SL, XR6, XR6A, XR10,
XR10A, XR20, XR20A, XR40, XR200A, XR200F.
For use with Honeywell Alarm System models:
FB-408ATPK, FB-624ATPK, FB-848ATPK.
Replaces Ademco/Honeywell Part Numbers: 1321/1361.
Does Not replace X-10 Interface Powerline
Carrier Device-type transformers.
Also can be used with any piece of equipment requiring
16.5 VAC and up to 40VA (about 2.4 amperes).
UL Listed.
This item is NEW.
Note: This Item is heavy. If shipped outside the United States
we must charge the Actual Shipping Cost.
Please Email us before ordering.
Price: $20.00
Replacement Alarm System Power Transformer.
Heavy-duty Class 2 power transformer.
AC Adapter is rated at 24 VAC/1.6 Amperes.
Plugs into a standard 115 VAC AC socket.
Screw terminal output.
Also can be used with any piece of equipment requiring
24 VAC and up to 40VA (about 1.6 Amperes).
UL Listed.
This item is New.
Note: This Item is heavy. If shipped outside the United States
we must charge the Actual Shipping Cost.
Please Email us before ordering.
Price: $15.00
Automatic Night Light.
Light turns on at dusk, off at dawn.
Plugs into any standard outlet.
Complete with replaceable 4 watt bulb.
With instructions.
This unit is NEW.
Price: $1.50
SPST Magnetic Contact Switch.
Used with alarm panels to protect doors and windows.
Two pieces. Fully-enclosed weather resistant Switch and Magnet.
For Closed-Circuit alarms. Switch Closes with Magnet Engaged.
Overall Size: 2 1/2" x 1/2" x 5/8".
With mounting hardware.
(Stock #: ALARMSW01)
Price: $3.00
Price: 6 For $14.50
SPST Alarm Plunger Switch.
Normally-Closed (when plunger is depressed) contacts.
Size (less plunger): 2 1/16" x 1" x 9/16".
Plunger Size: 9/16" x 1/4" diameter.
Surface mount with 3 screws (not included).
Screw contacts. UL listed.
Perfect for use as an alarm tamper switch or for protecting cabinet
doors and other enclosures.
Amseco part number: TSW-2T.
This item is NEW.
(Stock #: SW21)
Price: 1.75 Each
Price: 10 For $14.00
Alarm Pressure Mat.
SPST Normally-Open (when pressure is applied contacts close).
Originally used to monitor if a patient has fallen off a chair. Mat will
trigger when approximately 50 pounds or more is placed upon it.
Place Alarm Pressure Mat onto a hard surface such as a floor, table,
or shelf for best results.
Size: 15" x 7" x 1/2".
6 foot connecting cable. Includes connecting cable interface box.
Perfect for use for anti-theft protection of a item that must not be moved.
-Click Here To Return To Main Page-